Miller’s fabrication shop is completely equipped and allows our experienced fabricators to work on a multitude of projects.
For Equipment Capacity and Forming Quotes, Please Contact:
griff@millermech.com or call (518) 792-0430.
Cutting:
- 3-Mach4 Flow Dynamic Waterjet XD
- Computerized Cutting table, Lone Star Ranger III 12′-0″ x 24′-0″ with a Hypertherm XPR300plasma system
- H-D Pipe Rotary for up to 24″ pipe and 60 degree Articulating Bevel Head.
- Betenbender Shear- 12′- 0″ x 5/8″
- 4- Bug-o Circle Cutting Systems
- 3- Gullco Kat Track Cutting Tractors
- Hyd-Mech S20 series 3 18″ horizontal saw with computerized feed table
- Spartan Marvel 180 ton Hydraulic Dual Station Iron Worker
- Hyd-Mech Vertical 18″ Band Saw
- 11- Plasma Arc Cutting Machines (1/8″ to 4″ Capacity)
- Vernon Model G Pantograph 60″ Diameter Pipe Cutting System
Forming:
- Bertsch 100-10 Hydraulic Forming Roll 10′-0″
- Cincinnati 350 Ton CBII x 12′-0″ Hydraulic Press Brake
- Dreis Krump 1250 Ton x 16′-0″ Fully Computerized Hydraulic Press Brake
- Ercolina TB100 Top Bender Rotary Draw Tube and Pipe Bender
- Misc. H Press and Straighten Presses
- Roundo R5S Angle/Pipe/Bar/Channel Forming Roll
- 2- Small hand/Electric Forming Rolls
- Webb R3LD-8005 3 Roll 5′-0″ Plate Forming Roll
- Webb 912A 3 Roll 9′-0″ Plate Forming Roll
Material Handling:
- 3- Aronson 4000lbs. Positioners
- 4- Leveling Beads
- 7- Forklifts (2,000 lbs.-11,000 lbs.)
- Ransom 30,000lbs. Positioner
- Multiple sets Tank Turning Rolls (500lbs.-150,000lbs.)
- 3- Teledyne 1000lbs. Positioners
- 5 Ton Overhead Crane
- 10 Ton Overhead Crane
- 15 Ton Gantry Crane with Hooks
- 3- 25 Ton Overhead Cranes
- 2- Tractors w/Various Flatbeds, Drop Decks and Boxed Trailer
- 4- 1 Ton Trucks with Trailers for Hot Shot Deliveries
- Worthington 6000lbs. Positioner
Welding:
- 8- Bug-o Weld Overlay Machines
- Gullco GBM28 Weld Prep Machine
- 3- 650 Amp Hand Held Sub Arc Systems
- 9- Miller XMT 450 MPa ( multi-process mig machines)
- 60- Lincoln DC655 Welding Machines
- 4- Miller Delta Weld 452 Mig Machines with Feeders
- Pandjiris Model 1400-MANIP 14′-0″ Vertical x 14′-0″ Horizontal, 1000 Amp Sub Arc System w/Flux Heating and Recovery. 120,000lbs. Turning Capacity
- 30- Weldcraft Tig Units (Air and Water Cooled)
Machining:
- Fosdick 9′-0″ Drill Press
- Giddings Lewis Bickford Chipmaster Drill Press
- Horizontal Milling Machine
- 5′-0″ Lathe
- Powermatic 1200 Drill Press
Material Finishing:
- Time-saver series 3100- 36″wide abrasive finishng belt with water cooling
- Ceramic media tumbler