This was a project initiated for the president of a local company, specifically for his bathroom remodel.
Pictured below is a ¼” thick plate glass that is cut to approximately 4 foot by 2 foot, with (6) 1.0” diameter holes. This plate will be a backsplash for a towel warmer. There are special grommets that are installed in the holes and the heated elements are mounted to the glass. The heated element/towel bars run through the holes so the glass “floats” off the wall.
Another interesting project cut via Miller’s waterjet. For more information contact Patrick at patrick@millermech.com.
You must be logged in to post a comment.